Welcome to Zenith Micro control

Opening Hours : wednesday to Monday - 8am to 9pm
Tel. No. 02162-244401

Instaster Active





Instaster Active

Instaster  Active is a high level instant disinfectant produced by Synergic combination of  four quats and Isopropyl alcohol  to make a lethal combination for rapid disinfection. The four quats work in unison with IPA to impart  high level  disinfectant with Nano-technology that carries the active ingredients through the cell walls for rapid, complete cell death of  COVID-19 virus. Combination four quats insures microbicidal property for more than 6  hours of application.





Product Description

Composition:

Active Ingredients: Isopropyl Alcohol IP :  45 % V/V, Benzalkonium Chloride IP :  0.3 % W/V,  N – Propanol  : 35 % V/V Octyldecyldimethyl Ammonium Chloride:  0.13 % W/V, Dioctyl Dimethyl Ammonium Chloride :  0.057 % W/V ,Didecyl Dimethyl Ammonium Chloride : 0.082 % W/V . Other Ingredients: DI Water, Chelating Agents, pH Regulators and Corrosion Inhibitors

Features:

  • Very lethal to COVID-19 virus. Kills virus swiftly.
  • The synergistic blend of five active ingredients produces the fast acting and efficient disinfectant.
  • Suitable for the rapid disinfection of alcohol‐ resistant surfaces.
  • Fast drying.
  • Aldehyde‐free.
  • Fragrance and colourant – free.
  • Prolonged residual action .
  • Wide spectrum of anti microbial property including virus, mycobactor and spores.

Directions for Use:

Use Undiluted:

Spray the surfaces to be disinfected, with a sufficient amount of Instaster  Active  ready to use solution, ensuring complete coverage. Let the surface remain wet till it gets dry on it’s own. While using the disinfected  surface and instruments ensure that surface and instrument is wiped free of Instaster Active with sterile cloth before use.

Frequency of  Disinfection for high touch surfaces: after each touch.

Directions for Use:

Normal Surface: Wipe surface with wet wipe until the surface is visibly wet. Allow the surface to remain wet for 5 to 10 minutes. Allow to air dry.

Dirty Surface: Clean the surface first with a cloth or sheet. Wipe the surface with wet wipes. Allow the surface to remain wet for 10 minutes. Allow to air dry.

 Surfaces contaminated with virus must be cleaned from the surface or objects with a sheet before disinfecting with Instaster Active Pre-soaked wipes.

Contact time:

For COVID-19: Leave the surface wet for 10 minutes

For HIV: Leave surface wet for 5 minutes

For HBV and HCV : Leave surface wet for 5 to 10 minutes.

In each operation Do not force dry the surface or objects. Allow it to dry on its own

For effective Control of COVID-19 Virus: Follow the instructions given in Disinfection and cleaning technique for control of COVID-19 Pandemic.

Presentations:  500 ml, 1000 ml and 5000 ml.